MTCoonHunter wrote:
The break doesn't extent to the end of the stock, it's mainly where my right hand is in the picture. It runs vertical down the stock, so I'm sure if I don't do anything and keep shooting the gun it'd eventually hit the butt. Epoxy glue, is that something you get at a sporting goods store or something you buy at a hardware store?
Hardware Store. Don't get the quick set, get the longer setting stuff. It is stronger. mix it according to the directions. Use a plastic knife and a paper plate to mix it because once you do, they are pretty much done. coat the finish of the stock with vaseline so that if you get any run off it will clean up. apply and clamp with either an old inner tube or something similar. Use just a little bit, just enough to coat the crack. try to avoid run off as much as you can. Let it set for at least a day and then clean up the grease you laid down.