CoonDawgs.com Coonhound Classifieds and Message Forum

 

It is currently Fri Oct 19, 2018 7:11 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 4 posts ] 


Author Message
 Post subject: handi rifle question
PostPosted: Mon Aug 26, 2013 11:36 pm 
IP:
Offline
Tight Mouth
Tight Mouth

Joined: 31 Aug 2007
Posts: 117
Location: mn
I've got a couple questions for anybody that's had some of these nice little guns. I was given a .243 for a birthday gift a couple years ago. I shot probably about 10 rounds through it without a problem. Then the last shot, the break action popped open. Not all the way wide open, possibly because I have a bipod on it so was leaning into it some, but opened hard enough I though I broke something. Since then it pops open like that only after shots probably 1-2 out of 5 rounds shot. I've read up on other people needing to send the whole rifle back to the factory and having parts swapped out or fixed but I'd rather not do that if possible so does anybody know if its possible to fix it yourself? I can't find anything that looks worn out and its really clean but there has to be something that can be changed or ground down or even padded up with welding then ground down smooth? I don't wana ruin it but any ideas on what to try?
That's my main concern but I've also got another question.

I know a lot of these guns you can change out barrels with other calibers. I've also got a h-r 20 guage that I've had a few years and was wondering how to tell if I could interchange the barrels between the .243 and 20g?


Thanks for any ideas in advance


Top
 Profile  
Reply with quote  

 

Join the forum today and remove this ad!
Author Message
 Post subject: Re: handi rifle question
PostPosted: Tue Aug 27, 2013 3:31 pm 
IP:
Offline
Tight Mouth
Tight Mouth

Joined: 12 Dec 2011
Posts: 225
Location: Illinois
The gun probably needs to go to a gunsmith, if that action isn't good and tight it can be very dangerous. As for the barrels I believe they will not swap from shotgun to rifle but from rifle to rifle to change caliber, and then it needs to be done by a professional if not sent to the factory. The reason being that the new barrel may well fit but the headspacing if the shell will be all wrong .


Top
 Profile  
Reply with quote  
Author Message
 Post subject: Re: handi rifle question
PostPosted: Tue Oct 15, 2013 5:56 pm 
IP:
Offline
Tight Mouth
Tight Mouth

Joined: 21 Feb 2008
Posts: 111
Location: Minnesota
Not sure what might be wrong but you should have a gun smith take a look at it at the least, you might try taking it apart don't try disassembling the action but just remove the barrel and then take a good look at the action see if there is anything loose, might even used some compressed air or a spray nozzle directed into the action to see if anything blows out.

These guns are pretty basic and most gun smiths don't charge much to fix them if there is nothing stuck inside mucking up the works

You used to be able to get a 20 ga barrel for them but if you did nor buy it that way from the factory you had to send it in to them to be fitted due to liability issues


Top
 Profile  
Reply with quote  
Author Message
 Post subject: Re: handi rifle question
PostPosted: Wed Nov 06, 2013 11:39 pm 
IP:
Offline
Tight Mouth
Tight Mouth

Joined: 31 Aug 2007
Posts: 117
Location: mn
Thank you both for the replies. That's what I was expecting, just not what I had hoped for. I've pulled the barrel off a couple of times to clean and look around in there and everything seems clean and tight from what I can tell. I guess I've never tried comparing how it all looks to the shotgun since it should be pretty close. I just always hate having to have other people do things for me. I always like learning and figuing this stuff out for myself. But I guess it could be pretty dangerous having it pop apart in my face or anything so ill need to admit defeat early this time.

Thanks again for the replies. I appreciate your help.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  

Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  



Powered by phpBB® Forum Software © phpBB Group

Want to DISABLE pop-up ads & banners after 1st post of threads? Become a member of the forum & view the forum logged in.

CLICK HERE for more info.

CoonDawgs.com - Your One Stop Coon Dog Source for Coon Hunting!!