| CoonDawgs.com http://coondawgs.com/forum/ |
|
| nite lite ???? http://coondawgs.com/forum/viewtopic.php?f=28&t=52798 |
Page 1 of 1 |
| Author: | rosco 1 [ Tue Nov 13, 2007 3:33 pm ] |
| Post subject: | nite lite ???? |
has any one tried a HMP14- 4 volt bulb in a 6 volt halogen head if so how did it do brightness/burntime/bulblife I am trying to get more brightness any help would be appreciated |
|
| Author: | delta nightlife [ Tue Nov 27, 2007 2:29 pm ] |
| Post subject: | light |
man i have used the nite light 6 volt for years thats wat my dad used and thats wat i used for ever but when i had mine i used a bm30 bulb its 4 volts and its pretty bright and it will last as long as you can hunt lol and for 3 years i never changed the bulb and as far as i no the little fella i give it to is still using the same bulb |
|
| Author: | Farmboy-1 [ Tue Nov 27, 2007 11:19 pm ] |
| Post subject: | |
Roscoe1-I tried that HMP 4 volt bulb in my 6 volt halagen head& I blowed the first bulb at once. 2nd HMP 4 volt bulb lasted a few minutes then it blowed too. Was sure brighter the short time it lasted but that small fillament just can't handle the juice from a 6 volt battery. A BM-30 4 volt bulb will work really good & last a long time on a 6 volt battery because BM-30 has a much bigger filament. This would be the way to go if you are going with a 6 volt battery. Just my opinion. Good luck with whatever you decide to do. Farmboy-1 |
|
| Author: | Kenny Rhea [ Wed Nov 28, 2007 9:27 am ] |
| Post subject: | nite lite bulbs |
 You can use a 5.2 volt bulb and have pretty good luck. they are quite a bit brighter and aren't prone to blowing if you watch your reostat. The BM30 bulb works in a hot light not on a halogen head.Give me a call at 800-584-5490 I've got those bulbs if you don't find them locally.
|
|