| CoonDawgs.com http://coondawgs.com/forum/ |
|
| dog box pics and plans http://coondawgs.com/forum/viewtopic.php?f=28&t=48526 |
Page 1 of 1 |
| Author: | bagman [ Wed Aug 22, 2007 12:20 pm ] |
| Post subject: | dog box pics and plans |
hey guys i was thinking about building me own dog box this time instead of buying one. Do you guys have any pictures or plans that i could use to make one? A materials list would also help! thanks |
|
| Author: | charles shattuck [ Fri Aug 24, 2007 11:36 am ] |
| Post subject: | |
im gonna be makin a dog box in ag construction so if anyone has anyplans for a sheet metal dog box please post them asap |
|
| Author: | Lippy [ Fri Aug 24, 2007 8:26 pm ] |
| Post subject: | Dog box |
Well i used 1 inch angle iron and my cousin did the welding and i did the plywood sides and the carpet built a box type to pull out and now the top will be bolted on and it is angle also.And it is 5 inches deep and the part the dogs rig off of is a lid to the top compartment.Total cost was abput 250.00 dollars and that stuff came from home depot except the metal.When it is all the way done i will post a pict and see what everyone thinks.I will tell you the bottom is 40 inches wide by 4 foot long and it is 23 inches high.Then add the 5 inch compartment and the 8 inch cooler rack and tie up. |
|
| Author: | soup [ Wed Aug 29, 2007 6:31 am ] |
| Post subject: | |
Be carefull when building or buying a new dog box and make sure it has enough ventilation. I built a box out of plywood and started drilling holes in it with a 1" bit and didn't stop until it looked like swiss cheese. I would hate to loose a good dog due to my own negligence. |
|
| Author: | Redtick_97 [ Sun Jan 20, 2013 7:23 pm ] |
| Post subject: | Re: dog box pics and plans |
if anyone has any plans for building a dog box that is rather cheap let me know |
|